Panasonic KX-TAW848 - System Configuration-Hardware; Extension Port Configuration

2.1 System Configuration—Hardware
168 Feature Guide
2.1 System Configuration—Hardware
2.1.1 Extension Port Configuration
Description
There are three types of extension ports, used to connect analog proprietary telephones (APTs), single line
telephones (SLTs), Cell Stations (CSs), DSS Consoles, and Voice Processing Systems (VPS) to the PBX.
The devices which can be connected to each type of port are listed below.
a) APT Port: APT, DSS Console, and Panasonic VPS which supports DPT (Digital) Integration
b) SLT Port: SLT and VPS which supports DTMF Integration
c) Hybrid Port: APT, SLT, CS, DSS Console, and VPS
Conditions
• Automatic Detection on Hybrid Port
An APT, SLT, or CS can be connected to a hybrid port with no programming required.
• APT and SLT in Parallel Mode
An APT and an SLT can also be connected to a hybrid port and used in parallel mode.
• Wireless XDP Parallel Mode
A PS can be used in Wireless XDP Parallel mode with a wired telephone.
(→ 1.20.3 Wireless XDP Parallel Mode)
• DSS Console and Paired Telephone Assignment
When a DSS Console is connected, a PT must be paired with the DSS Console through system
programming (→ Console Paired Telephone [007]).