Panasonic KX-TAW848 - Page 295

4.7 Configuration [1]
Feature Guide 295
1. Set the status of the extension port to "OUS".
2. Change the port type of the extension port, then click Apply.
3. Set the status of the extension port to "INS".
Default
Normal
Value Range
Normal: For connecting a PT
DSS: For connecting a DSS Console (A maximum of 4 DSS Consoles can be connected to the PBX.)
VM (DPT): For connecting a Panasonic VPS through DPT Integration
Programming References
4.7.12 Extension Port [1-5] Port Command
Feature Guide References
None
PT Property—Location No. (for APT or Hybrid port)
Specifies the location number of the connected DSS Console.
Default
1
Value Range
1–4
Feature Guide References
None
PT Property—VM Unit No. (for APT or Hybrid port)
Selects the unit number of the connected VPS.
Default
1
Value Range
1
Feature Guide References
None
PT Property—VM Port No. (for APT or Hybrid port)
Specifies the VM port number for the port.