Panasonic KX-TCD200FX - Managing Caller List Entries

Caller ID Service
29
4 Press {C} or {s} to call back the
displayed party.
Editing a caller’s phone number
before calling back
1
Press {j/OK}.
2 Select “Caller List”, then press
{>}.
3 Press {e} or {v} repeatedly to display
the desired entry.
4 To add a number
Press the dial key ({0} to {9}).
L The number you pressed is added to
the top of the current number.
To erase a number
Press {j/OK}, select “Edit and
Call”, then press {>}.
Press {<} or {>} to place the cursor on
the number you wish to erase, then
press {C/T}.
5 Press {C} or {s}.
Erasing caller information
1
Press {j/OK}.
2 Select “Caller List”, then press
{>}.
3 Press {e} or {v} repeatedly to display
the desired entry, then press {j/OK}.
4 Select “Erase”, then press {>}.
L To erase all entries, select “Erase
All”, then press {>}.
5 Select “Yes”, then press {>}.
6 Press {ih}.
Storing caller information into the
phonebook
1
Press {j/OK}.
2 Select “Caller List”, then press
{>}.
3 Press {e} or {v} repeatedly to display
the desired entry, then press {j/OK}.
4 Select “Add Phonebook”, then press
{>}.
5 Continue from step 3, “Adding entries to
the phonebook”, page 14.
TCD200FX(e-e).book Page 29 Monday, February 7, 2005 1:19 PM