Panasonic KX-TCD300FXS - Page 92

29.3.3. MMI1 Setting
Address Initial
Type
Name Description Default value Country
Setting
0x0102 1 EEP_DspSdtLevel DSP Parameter SideTone2
Main:SideTone2 Main route level
MictoRcv:SideTone2 MIc to Receiver level
0x00,0x0E x
0x0104 1 EEP_DspToneLevel DSP Parameter ToneLevel
Talk:Tone Level in Talk mode
Spp:Tone Level in Spp mode
0x00,0x20,0x00,0x30 x
0x0108 1 EEP_DspRcvVol DSP Parameter Receiver Volume TX Level
TxTalk:Receiver Volume Tx Level in Talk mode
TxSpp:Receiver Volume Tx Level in Spp mode
0xFF,0x7F x
0x000E F EEP_LcdContrast LCD contrast 0x20 x
0x0154 1 EEP_CountryFunction01 Country parameter
Bit0:Call waiting Tone on/off...1:on, 0:off
Bit1:Clock Back Up...1:on, 0:off
Bit2:Charge ON Tone...1:Tone on, 0:KeyTone operating
Bit3:BackUpTime revise...1:on, 0:off
Bit4:On Charge Partial...1:none, 0:Partial Display
Bit5-7:Reserve
0x1E x
0x0157 3 EEP_EEToneConfig Tone Option Data
Bit0:Keytone on/off00 - 0000 = Off / 0001 = Tone On
Bit1:Keytone on/off01 - Reserve
Bit2:Keytone on/off02 - Reserve
Bit3:Keytone on/off03 - Reserve
Bit4:Call waiting on/off - 1/0
Bit5:Range alarm on/off - 1/0
Bit6:Battery low alarm on/off - 1/0
0x51 x
29.3.4. Battery Parameters
Address Initial
Type
Name Description Default value Country
Setting
0x0004 F EEP_LowVoltage ADC value for battery low detection 0x28 x
0x0005 F EEP_NoVoltage ADC value for shutdown voltage 0x1B x
92
KX-TCD300FXS / KX-TCD300FXT / KX-TCA130FXS / KX-TCA130FXT