*1 When button is released, the display changes to the standby mode.
*2 The display goes blank.
8.2. Making a Call
*1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers.
8.3. Answering a Call
- Each ringer will start ringing with lower volume then gradually increase
the volume when receiving a call.
*1 You can also answer a call by pressing any dialling button, INTERCOM, , or .
8.4. Setting the Clock/Date
After a mains power failure the clock needs to be reset. Ensure that icon is not flashing.
21
www.freeservicemanuals.info
Digitized in Heiloo, Holland
To Next Page
Loading...
