Panasonic KX-TD1232 - Page 11

11
3.
To record the result;
a)
Press .
•
Attention!!
All directory data will be cleared.
• The display will appear as below when the result has not been recorded.
• If you want to use a PS as usual, it is required to delete all recorded Radio Signal
Test results.
Display: ALL BOOK DATA IS
CLEARED!!
Y=TALK N=CANCEL
b)
Press .
• The display will show when the Scan Data on the bottom line if it is recorded.
Display example: SAVE DATA
LOG NO.(0-9)?
c)
Enter the
log number
(0 through 9).
Display example: SAVE DATA
LOG NO.(0-9)? 0
CH0 SLOT:06 SYNC
L:12 0000 / 0100
Display example:
When synchronised
Frame error (0000 – 9999)
Abbreviation of
SYNCHRONOUS
CH0 SLOT:06
L:00
When not synchronised
Channel
number
(0 – 9)
Signal
level
(00 – 12)
strength
Slot number (00 – 23)
Level:00
Level:01
Level:02 – 07
Level:08 – 10
Level:11 – 12
Out of range
Catches noise easily or disconnects.
May catch noise.
Good
Better
RECOMMENDATION
• Frame error : 0000
• Signal strength level : more than level 08
CS-ID: 9005301234
/ Frame counter
(0000 – 9999)
CS ID Number