Panasonic KX-TD1232 - Page 5

5
ENABLE
DISABLE
18.
Press the SELECT button.
Display example:
19.
If you select "ENABLE" in step 17, enter a
System Lock password
.
20.
Press the
AUTO/OK
button.
21.
Enter the
System Lock password
again.
22.
Press the
AUTO/OK
button.
23.
To programme another PS, press
NEXT
or
PREV
, or
SELECT
and the desired
PS
registration number
.
24.
Repeat steps 4 through 22.
25.
Press
END
.
[Re-registering]
(e.g. when changing the DECT system)
1.
Repeat steps 1 through 8 of the “Registering for the first time” programming.
2.
Press the
UP/DOWN
button repeatedly until the display below is selected.
Display: PS-PROGRAM
3.
Press the
SELECT
button.
4.
Press the
UP/DOWN
button repeatedly until the display below is selected.
Display: DECT-SYS SETTING
5.
Press the
SELECT
button.
If a System Lock password is registered before, the display below will appear.
(if disabled):
(if enabled) :
UNLOCKED
ENTER PASSWORD
=----
Display: ENTER PASSWORD
=****
Display: REENTER PASSWORD
=----
Display: REENTER PASSWORD
=****
Display: LOCKED
(With a display PT)