Panasonic KX-TD1232 - Ringing Tone Selection for CO Buttons

Station Programming
User Manual 55
2.2.4 Ringing Tone Selection for CO Buttons
Allows you to assign a ringer frequency to each CO (default: tone type 2).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Press CO button
which you wish to
change the ringing tone.
Press STORE.
Press the same
CO button again.
Enter the tone type number
(1 through 8).
tone type no.
AUTO DIAL
STORE
The display shows the current
status.
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.
<PT Display Example>
(-x:tone type number)
If you want to change the tone type, enter another tone type
number.
Tone Type-X
PT
The STORE indicator lights.
The display shows the initial
programming mode.