3 Features C
Features 3-39
Call Log, Incoming
Description If the display digital proprietary telephone (DPT: KX-T7433, KX-
T7436, KX-T7230 or KX-T7235) user cannot answer a call, the
telephone automatically records the caller’s information. The user
can also record the caller’s information manually, even after
answering the call. Moreover, the user can call back the caller by
checking the call log. This is available if a telephone receives
incoming outside calls with a Caller ID service. A maximum of 15
calls per telephone can be logged.
The displayed information is as follows:
• The receiving outside line number and name
• The party’s phone number and name
• The date and time the call was made
• The sequence number and number of times called
Conditions • It is necessary to assign your area code first before you use the Caller
ID feature.
• The call is registered at the time DPT finishes ringing. If a call is
directed to multiple DPTs, the call is registered at the DPT that has the
smallest jack number of the ringing DPTs. However, if the telephone
which is connected to the smallest jack is not a DPT, the call is not
registered.
• Information is also recorded even if a transferred call (unscreened) is
not answered.
• When the call log is full (i.e. 15 calls are stored), the user can select to
overwrite the data, replacing the oldest call with the newest one at his /
her extension (Call Log, Incoming).
• The telephone user can lock the display of the unit so that incoming call
information is not shown on the display. The operator can cancel the
lock in case the user forgets the lock code.
To Next Page
Loading...
