C 3 Features
3-40 Features
• The system automatically modifies the incoming caller’s number in a
pre-programmed way for local or long distance calls. The modified
number will be recorded for calling back. There are ten locations for
area codes (program [125]) which are correspond to that of modified
numbers for local call (program [126]).
<Preparation example>
[125] “Area Code Assignment” : 201
[126] “Caller ID Modification for Local Call” :
delete – 3 digits, add – blank
[127] “Caller ID Modification for Long Distance Call” :
delete – 0 digit, add – 1
Caller’s number Recorded
provided by CO caller’s number
Local call: 2011234567 1234567 (modified by [126])
Long distance call: 7149876543 17149876543 (modified by [127])
Connection References
Section 2, Installation
2.4.2 4-SLT Extension Expansion Card / Caller ID/DISA/FAX Detection
Card Installation
Programming References
Section 4, System Programming
[100] Flexible Numbering, Call log, incoming / Call log lock, incoming
[110] Caller ID Code Set
[111] Caller ID Name Set
[125] Area Code Assignment
[126] Caller ID Modification for Local Call
[127] Caller ID Modification for Long Distance Call
[406] Caller ID Assignment
[417] Outside Line Name Assignment
Feature References Section 3, Features
Caller ID
Operation Reference Operator / Manager Service Features
—User Manual Call Log Lock Control, Incoming
Special Display Features
Call Log, Incoming
Call Log Lock, Incoming
To Next Page
Loading...
