3 Features C
Features 3-41
Call Park
Description Allows the extension user to place a held call into a system parking
area. This releases the user from the parked call to perform other
operations. The parked call can be retrieved by any extension user.
Conditions • The system contains ten parking areas, each of which has its own call
park number. Up to ten calls can be parked at the same time in the
system. The number of holding slots remains at 10.
• If a parked call is not retrieved in a specific period of time, Call Park
Recall occurs.
• If a parked call is not retrieved in 30 minutes, it is automatically
disconnected.
• A confirmation tone is sent to the user when the parked call is retrieved.
Eliminating the tone is programmable.
Programming References
Section 4, System Programming
[100] Flexible Numbering, Call park / call park retrieve
[219] Call Park Recall Time
[990] System Additional Information, Field (16)
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Call Park
To Next Page
Loading...
