C 3 Features
3-42 Features
Call Pickup, Directed
Description Allows an extension user to answer a call ringing at any other
extension.
Conditions • Doorphone calls can be picked up from extensions that are not
programmed to answer doorphone calls.
• A confirmation tone is sent to the user when the call is picked up.
Eliminating the tone is programmable.
• You can pick up a call by pressing a flashing DSS (Direct Station
Selection) button assigned on a proprietary telephone.
Programming References
Section 4, System Programming
[100] Flexible Numbering, Call pickup, directed
[990] System Additional Information, Field (16)
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Call Pickup, Directed
Call Pickup, Group
Description Allows an extension user to answer a call that is ringing at another
telephone, if the call is ringing within the user’s extension group.
Conditions • The user can pick up an incoming outside, intercom, or doorphone call.
• The priority of Group Call Pickup is as follows:
Outside call > Transferred call > Extension call > Doorphone call
• Group Call Pickup starts with the lowest jack number.
• A confirmation tone is sent to the user when the call is picked up.
Eliminating the tone is programmable.
Programming References
Section 4, System Programming
[100] Flexible Numbering, Call pickup, group
[990] System Additional Information, Field (16)
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Call Pickup, Group
To Next Page
Loading...
