3 Features C
Features 3-47
Call Transfer, Unscreened – to Extension
Description Allows the user to transfer an intercom or outside call directly to an
extension party. After dialing the destination extension, the user
replaces the handset while listening for the ringback tone.
Conditions • If the destination party does not answer within the transfer recall time,
the call will return to the user or Operator 1. You can select either one
by system programming.
• This function is possible when the destination is sending ringback or
busy tone. If the destination is busy, Camp-On Transfer occurs.
• The ringing signal pattern follows the regular ringing pattern depending
on the party being transferred: outside or extension call ringing.
• If music on hold is enabled, music is sent to the caller while being
transferred. It is system-programmable whether to send ringback tone
or music on hold to the caller by program [990], Field (1).
• The destination extension must have a CO button which is common to
the outside line in use by the transferring party.
Programming References
Section 4, System Programming
[201] Transfer Recall Time
[990] System Additional Information, Fields (1), (11)
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Call Transfer — to Extension
To Next Page
Loading...
