D 3 Features
3-62 Features
Display, Call Information
Description The display proprietary telephone shows the user the following call
information:
Extension number and name
These are shown when calling or when called by an
extension user and during an established intercom call.
A display example: 12: Smith
Dialed telephone number
This is shown when dialing the telephone number.
A display example: 91234567890
Number or name of the caller
These are shown if the Caller ID feature is available.
Display examples: CO 3: 1234567890
CO 3: Panasonic
Outside Line number and name
This is shown when receiving an outside call.
A display example: CO 3: AB COMPANY
Call duration
This is shown during an established outside call. The
display remains for five seconds after the call is finished.
A display example: CO 2 0:02'28
Conditions • Extension numbers and names are programmable. If no extension name
is stored, only the extension number is displayed.
• The display shows no intercom call duration.
• The outgoing outside call duration starts when the programmable timer
expires.
Programming References
Section 4, System Programming
[003] Extension Number Set
[004] Extension Name Set
[212] Call Duration Count Start Time
[417] Outside Line Name Assignment
Feature References Section 3, Features
Caller ID
Operation References Not applicable.
To Next Page
Loading...
