3 Features H
Features 3-87
Hold Recall
Description Prevents a call on hold from being kept waiting longer than a pre-
determined time. If the timer expires, ringing or an alarm tone is
generated as a reminder to the user who held the call. If the user is
on-hook and its speaker-phone is off, the phone will ring. If the
user is off-hook or in speakerphone mode when the timer expires,
an alarm tone is sent from the built-in speaker of a proprietary
telephone (PT) or from the handset receiver of a standard telephone
at 15-second intervals.
Conditions • Hold Recall can be disabled by programming.
• The display PT flashes the indication of the held party for five seconds
at 15-second intervals synchronized with the tone.
• Alarm tone is sent as follows:
Programming References
Section 4, System Programming
[200] Hold Recall Time
Feature References Section 3, Features
Call Hold – Intercom Call Hold, Exclusive – Intercom
Call Hold – Outside Line Call Hold, Exclusive – Outside
Line
Operation References Not applicable.
15 s
To Next Page
Loading...
