H 3 Features
3-88 Features
Host PBX Access
Description The system may be installed behind an existing host PBX. This is
performed by connecting a line from the host to an outside line in
the Digital Super Hybrid System.
Conditions • To enable Host PBX Access, put the host PBX line in an outside line.
The user accesses the host PBX by selecting that outside line.
• A Host PBX Access Code is required to access outside lines of the host
PBX.
• A pause, if programmed, can be inserted between the user-dialed Host
PBX Access Code and the following digits (Automatic Pause Insertion).
Program the pause time required by the Host PBX for that outside line.
• Access to the host PBX during a conversation is also possible (External
Feature Access).
Programming References
Section 4, System Programming
[411] Host PBX Access Codes
[412] Pause Time
Feature References Section 3, Features
External Feature Access Pause Insertion, Automatic
Operation References Not applicable.
To Next Page
Loading...
