Panasonic KX-TD308 - LED Indication, Outside Line

L 3 Features
3-92 Features
LED Indication, Outside Line
Description The LED (Light Emitting Diode) indicators of the buttons
associated with outside lines show the line conditions with a variety
of lighting patterns. This allows the user to see which lines are idle
and which lines are in use. The table below shows the lighting
pattern for different line conditions.
Flashing light patterns
Conditions • Red slow flashing indication appears on the Single-CO (S-CO) button
only.
• The indication of Privacy Release appears on the S-CO button only.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
Station Programming.......................................................User Manual
Flexible Button Assignment – Loop-CO (L-CO) Button,
Single-CO (S-CO) Button
Outside Line Status
Idle
I-use
I-hold
I-Exclusive Hold / Outside-to-outside
line call / Unattended Conference
Hold Recall / Privacy Release possible /
Incoming call
Other-use / Log-Out
Other-hold
LED Indicator
Off
Green On
Green slow flashing
Green moderate
flashing
Green rapid flashing
Red On
Red slow flashing
1 s
Slow flashing
Moderate flashing
Rapid flashing