O 3 Features
3-110 Features
One-Touch Transfer by DSS Button
Description This feature, if programmed, allows the proprietary telephone user
to hold an outside call and quickly transfer it to an extension.
While talking to an outside party, pressing a DSS button provides
automatic hold and transfer. There is no need to press the
TRANSFER button. The extension starts ringing immediately.
Conditions • One-Touch Transfer cannot be performed when there is another call on
Consultation Hold.
• If One-Touch Transfer mode is disabled, the user transfers an outside
call by pressing the TRANSFER button followed by the DSS button.
Programming References
Section 4, System Programming
[108] Automatic Hold by CO / DSS Button
Feature References Section 3, Features
Button, Direct Station Selection (DSS)
Operation References DPT Features
—User Manual Call Transfer — to Extension
To Next Page
Loading...
