O 3 Features
3-114 Features
Outside Line Connection Assignment
Description This allows you to specify the outside lines connected to your
system which prevents an extension user from originating an
outside call by selecting a line which is not connected. An idle line
is selected from the connected ones when an extension user makes
an Automatic Line Access.
Conditions • If the user tries to make a call with a disconnected line, a reorder tone
sounds to indicate that the line is out of use.
• This is effective for all outgoing calls including Direct Inward System
Access (DISA).
Programming References
Section 4, System Programming
[400] Outside Line Connection Assignment
Feature References None
Operation References Not applicable.
Outside Line Connection Assignment – Outgoing
Description Allows you to assign the outside line to an extension user which is
used for outgoing calls. This feature is useful to prevent
unauthorized toll calls.
Conditions • When an extension user tries to make an outside call on a disallowed
outside line, a reorder tone is sent to indicate that the user cannot use
the outside line.
• Day and Night Service are individually programmed. (Night Service)
Programming References
Section 4, System Programming
[605]–[606] Outgoing Permitted Outside Line Assignment — Day /
Night
Feature References None
Operation References Not applicable.
To Next Page
Loading...
