System Programming 4-17
4.2 Manager Programming
Date and Time Set (contd.)
000
9. Keep pressing SELECT until the desired day of the week is
displayed.
10. Press STORE.
11. Press NEXT.
Display example: 12:00 PM 24
12. Enter the hour.
To change the current entry, press CLEAR and enter the new hour.
13. Press .
14. Enter the minute.
To change the current entry, press CLEAR and enter the new minute.
15. Press .
16. Press SELECT for AM or PM.
17. Press .
18. Press SELECT for 12 or 24 (clock hour).
19. Press STORE.
20. Press END.
Conditions • After changing an entry, you can press STORE. You do not have
to perform the rest of the steps.
• To return to a previous field, press in steps 4 through 9 and steps
13 through 18.
• If you hear an alarm after pressing STORE, check that the date is valid.
• The clock starts immediately after the STORE button is pressed.
• You cannot leave an entry empty.
• Program [990] “System Additional Information, Field (30)” is used to
enable the automatic time adjustment by Caller ID information once a
day.
Feature References Section 3, Features
Display, in Idle
To Next Page
Loading...
