4-20 System Programming
4.2 Manager Programming
System Speed Dialing Name Set
002
Description Assigns names to the system speed dial numbers assigned in
program [001] “System Speed Dialing Number Set”. KX-T7235,
KX-T7431, KX-T7433, and KX-T7436 telephones can show the
stored name during System Speed Dialing.
Selection • Speed dial number: 00 through 99
• Name: 10 characters (max.)
Default All speed dial numbers – Not stored
Programming 1. Enter 002.
Display: 002 SYS SPD NAME
2. Press NEXT.
Display: SPD Code?→
3. Enter a speed dial number.
To enter speed dial number 00, you can also press NEXT.
Display example: 00:Not Stored
4. Enter a name.
For entering characters, see Section 4.1.3, “Entering Characters”.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5. Press STORE.
6. To program another speed dial number, press NEXT or
PREV, or SELECT and the desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • Speed dial numbers are programmed in program [001] “System
Speed Dialing Number Set”.
• Each name has a maximum of 10 characters.
• To go to another speed dial number in steps 3 through 6, press
SELECT and start with step 3.
Feature References Section 3, Features
Special Display Features — Call Directory
To Next Page
Loading...
