Panasonic KX-TD308 - Flexible CO Button Assignment

4-24 System Programming
4.2 Manager Programming
Flexible CO Button Assignment
005
Description Used to determine the use of the flexible CO buttons on proprietary
telephones from a centralized telephone.
Selection • Jack number: 1 through 8
• Button Code (plus parameter, if required):
Default All jacks – CO buttons 1 through 3 = Single-CO 1 through 3;
Ring tone type 2
Others = Not stored
Programming 1. Enter 005.
Display: 005 FLEXIBLE CO
2. Press NEXT.
Display: Jack NO?→
†: Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone
capable Panasonic Voice Processing System (one that supports digital proprietary telephone
integration; e.g. KX-TVS100).
Parameter
1 through 3 (Outside line number)
2 through 4 digits (Extension number)
16 digits max. (Telephone number)
None
None
None
None
None
None
2 through 4 digits (Phantom extension number)
2 through 4 digits (Extension number)
2 through 4 digits (Extension number)
2 through 4 digits (Extension number)
None
None
None
1 through 8 (ring tone type number)
Button Code
0 (Single-CO)
1 (DSS)
2 (One-Touch)
3 (Message Waiting)
4 (FWD/DND)
5 (Save)
6 (Account)
70 (Conference)
71 (Log-In/Log-Out)
72 (Phantom Extension)
8 (Voice Mail Transfer)
90 (Two-Way Record)
†
91 (Two-Way Transfer)
†
92 (Live Call Screening)
†
93 (Live Call Screening Cancel)
†
(Loop-CO)
CO (ringer frequency)