4.3 System Programming
Flexible Numbering (contd.)
100
System Programming 4-31
2. Press NEXT.
3. Enter 00.
Display: All Feature CLR?
4. Press STORE.
5. Press END.
Conditions • Each extension block has one or two digits, consisting of 0 through 9.
Assign the leading digits for extension numbers of the respective
blocks.
• Assignment of extension blocks defines the limits for programs [003]
“Extension Number Set”, [118] “Voice Mail Extension Number
Assignment”, [124] “Phantom Extension Number Assignment” and
[813] “Floating Number Assignment”.
• Each feature number has one through three digits, consisting of 0
through 9, , and #.
• If or # is included in a feature number, dial pulse telephone users
cannot access the feature.
• Double entry and incompatible combinations are invalid. Valid entry
examples: 30 and 31, 210 and 211. Invalid entry examples: 5 and 5, 30
and 301.
• If you delete a feature number, the feature cannot be used by dialing
operation.
• You can remove all the feature numbers except selections (01) through
(16).
• To clear an extension block (01) through (16), it is required to change
the corresponding numbers assigned in program [003] “Extension
Number Set”, [118] “Voice Mail Extension Number Assignment”, [124]
“Phantom Extension Number Assignment” and program [813]
“Floating Number Assignment”.
Feature References
Section 3, Features
Flexible Numbering
To Next Page
Loading...
