4.3 System Programming
Day / Night Service Starting Time (contd.)
102
4-36 System Programming
8. Press SELECT for AM or PM.
9. Press STORE.
10. To program another day / night mode or day of the week,
press NEXT or PREV, or SELECT and the day of the week
selection number.
11. Repeat steps 4 through 10.
12. Press END.
Conditions
• To select the desired day, you may keep pressing NEXT in step 3. To
assign every day of the week to one selection, press the key in step
3. In this case, the display shows the contents programmed for Sunday.
• If day / night switching is not desired, select “Disable” in step 4.
• You cannot leave the entry empty.
Feature References Section 3, Features
Night Service
To Next Page
Loading...
