4.3 System Programming
System Password
107
System Programming 4-41
Description Assigns the password required for entering System Programming
mode and for maintenance from a personal computer.
Selection Password: 4 through 7 digits
Default 1234
Programming 1. Enter 107.
Display: 107 SYS PASSWORD
2. Press NEXT.
Display: Password:1234
3. Enter a password.
To change the current entry, press CLEAR and enter the new
password.
4. Press STORE.
5. Press END.
Conditions • The password can be from four to seven digits long. The valid numbers
are from 0 through 9.
• If less than four digits are entered, they are not stored.
• You cannot leave the entry empty.
Feature References Section 3, Features
System Programming with Personal Computer
System Programming with Proprietary Telephone
To Next Page
Loading...
