4.3 System Programming
Voice Mail Extension Group Assignment †
119
4-52 System Programming
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVS100).
Description Assigns each voice mail number to a voice mail extension group
number.
Selection • Voice mail number (VM): 1 through 4,
( =all voice mail number)
• Voice mail extension group number (EXG) = 1 through 8
Default All voice mail numbers = EXG 1
Programming 1. Enter 119.
Display: 119 VM EXT GROUP
2. Press NEXT.
Display: VM NO?→
3. Enter a voice mail number.
To enter voice mail number 1, you can also press NEXT.
Display example: VM-1:#2-1:EXG1
4. Enter the voice mail extension group number.
To delete the current entry, press CLEAR.
To change the current entry, enter the new number.
5. Press STORE.
6. To program another voice mail number, press NEXT or
PREV, or SELECT and the desired voice mail number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • The display shows “VM-X:#Y-1:EXG Z” in step 3.
“X” means a voice mail number. “Y” means the jack number of the
voice mail port programmed in [117] “Voice Mail Number
Assignment”.
“-1” of Y-1 means the first part of jack number in digital line.
“Y-2” means the second part of the jack number in digital line.
Feature References Section 3, Features
Voice Mail Integration for Digital Proprietary Telephones
To Next Page
Loading...
