4.3 System Programming
User Password
120
System Programming 4-53
Description Assigns the password required for entering the User Programming
mode.
In the User Programming Mode, any display digital proprietary
telephone user in the system can set the following programs:
[000] Date and Time Set
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
[003] Extension Number Set
[004] Extension Name Set
[005] Flexible CO Button Assignment
[006] Operator/Manager Extension Assignment
[008] Absent Messages
[009] Quick Dial Number Set
Selection Password: 4 through 7 digits
Default 1234
Programming 1. Enter 120.
Display: 120 USR PASSWORD
2. Press NEXT.
Display example: Password:1234
3. Enter a password.
To change the current entry, press CLEAR and enter the new
password.
4. Press STORE.
5. Press END.
Conditions • The password can be from four to seven digits long. Valid numbers are
from 0 to 9.
• If less than four digits are entered, they will not be stored.
• You cannot leave the entry empty.
Feature Reference Section 3, Features
User Programming (Manager Programming)
To Next Page
Loading...
