4.3 System Programming
Walking COS Password
121
4-54 System Programming
Description Assigns the password required for Walking COS.
Selection Password: 4 through 7 digits
Default 1234
Programming 1. Enter 121.
Display: 121 COS PASSWORD
2. Press NEXT.
Display example: Password:1234
3. Enter a password.
To change the current entry, press CLEAR and enter the new
password.
4. Press STORE.
5. Press END.
Conditions • The password can be from four to seven digits long. Valid numbers are
from 0 to 9.
• If less than four digits are entered, they will not be stored.
• You cannot leave the entry empty.
Feature References Section 3, Features
Walking COS
To Next Page
Loading...
