4.3 System Programming
Caller ID Modification for Local Call
126
System Programming 4-57
Description
Assigns removed digits from the received caller’s number of a local call,
and adds number to make the final number which serves as the Caller ID
number. The system records the modified caller’s number to the
incoming call log list so that the extension user can call back the caller.
Digits are removed from or added to the beginning of the received digits.
Selection • Location number: 01 through 10
• Number of digits to be deleted: 0 through 9 (0=no deletion)
• Number to be added: 4 digits (max.)
Default All locations – Deleted digits = 3, Added number = blank
Programming 1. Enter 126.
Display: 126 CID LOCAL
2. Press NEXT.
Display: Location NO?→
3. Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:Del3,Add
4. Enter the number of digits to be deleted.
To change the current entry, press CLEAR and enter the new number.
5. Press to program the number to be added, if required.
6. Enter the number to be added.
To change the current entry, press CLEAR and enter the new number.
7. Press STORE.
8. To program another location number, press NEXT or
PREV, or SELECT and the desired location number.
9. Repeat steps 4 through 8.
10. Press END.
Conditions • The added number has a maximum of 4 digits, consisting of 0 through
9, and #.
• There are ten location numbers for modified numbers, which
corresponds to those in program [125] “Area Code Assignment”.
Feature Reference Section 3, Features
Caller ID
Call Log, Incoming
To Next Page
Loading...
