4.4 Timer Programming
Transfer Recall Time
201
System Programming 4-63
Description Sets the number of rings before transfer recall occurs. If a
transferred call is not answered after the programmed number of
rings, the call returns to the original caller.
Selection Number of rings: 0 through 48 (0=Transfer Recall disabled)
Default 12 rings
Programming 1. Enter 201.
Display: 201 TRAN RECALL
2. Press NEXT.
Display example: Time:12 rings
3. Enter the number of rings.
To change the current entry, press CLEAR and enter the new number
of rings.
4. Press STORE.
5. Press END.
Conditions • Select “0” if Transfer Recall is not required.
• One ring is equivalent to five seconds.
• You cannot leave the entry empty.
Feature References Section 3, Features
Call Transfer, Unscreened – to Extension
To Next Page
Loading...
