Panasonic KX-TD308 - Call Forwarding - no Answer Time

4.4 Timer Programming
Call Forwarding – No Answer Time
202
4-64 System Programming
Description Sets the number of rings for Call Forwarding – No Answer feature.
If a call is not answered after the programmed number of rings, the
call is forwarded to the destination.
Selection Number of rings: 1 through 12
Default 3 rings
Programming 1. Enter 202.
Display: 202 CALL FWD-NA
2. Press NEXT.
Display example: Time: 3 rings
3. Enter the number of rings.
To change the current entry, press CLEAR and enter the new number
of rings.
4. Press STORE.
5. Press END.
Conditions • One ring is equivalent to five seconds.
• This timer is also used for Intercept Routing. If an incoming DISA
(Direct Inward System Access) call to the Intercept Routing destination
is not answered before this timer expires, the call will be disconnected.
• You cannot leave the entry empty.
Feature References Section 3, Features
Call Forwarding – Busy / No Answer
Call Forwarding – No Answer