4.4 Timer Programming
Pickup Dial Waiting Time
204
4-66 System Programming
Description Sets the number of seconds for Pickup Dialing. If the telephone
user lifts the handset, the programmed party is called when the time
expires.
Selection Time (seconds): 1 through 5
Default 1 s
Programming 1. Enter 204.
Display: 204 PICKUP DIAL
2. Press NEXT.
Display example: Time:1 sec
3. Enter the time.
To change the current entry, enter the new time.
4. Press STORE.
5. Press END.
Conditions • This time gives the user an opportunity to dial digits before the
automatic dialing process takes place.
Feature References Section 3, Features
Pickup Dialing
To Next Page
Loading...
