4.4 Timer Programming
Dial Start Time
211
System Programming 4-71
Description Sets the number of milliseconds the system waits before dialing
after an outside line is seized.
Selection Time (milliseconds): 0 through 40 (✕100 is the actual time)
Default 500 ms
Programming 1. Enter 211.
Display: 211 DIAL START
2. Press NEXT.
Display example: Time: 500 msec
3. Enter the time.
To change the current entry, press CLEAR and enter the new time.
4. Press STORE.
5. Press END.
Conditions • You enter a number from 0 through 40. The actual time is a 100 times
your input.
• You cannot leave the entry empty.
Feature References Section 3, Features
Line Access, Automatic
Line Access, Direct
Line Access, Individual
To Next Page
Loading...
