4.4 Timer Programming
DISA AA Wait Time
218
4-76 System Programming
Description Sets the number of seconds the system waits for a second digit
entry. If the timer expires, the system assumes that the first digit is
a DISA (Direct Inward System Access) built-in auto attendant
number if assigned in program [815] “DISA Built-in Auto
Attendant”.
Selection Time (seconds): 1 through 5
Default 1 sec
Programming 1. Enter 218.
Display: 218 DISA AA WAIT
2. Press NEXT.
Display example: Time:1 sec
3. Enter the time.
To change the current entry, enter the new time.
4. Press STORE.
5. Press END.
Conditions None
Feature References Section 3, Features
Direct Inward System Access (DISA)
To Next Page
Loading...
