4.4 Timer Programming
Call Park Recall Time
219
System Programming 4-77
Description Sets the number of rings before call park recall occurs. Call park
recall is used to alert an extension that a call has been parked for an
extended period of time.
Selection Number of rings: 0 through 48 (0=Call Park Recall disabled)
Default 12 rings
Programming 1. Enter 219.
Display: 219 PARK RECALL
2. Press NEXT.
Display example: Time:12 rings
3. Enter the number of rings.
To change the current entry, press CLEAR and enter the new number
of rings.
4. Press STORE.
5. Press END.
Conditions • One ring is equivalent to five seconds.
• Select “0” if Call Park Recall is not required.
• You cannot leave the entry empty.
Feature References Section 3, Features
Call Park
To Next Page
Loading...
