Panasonic KX-TD308 - Executive Busy Override

4.7 COS Programming
Executive Busy Override
505
System Programming 4-115
Description Determines which Classes of Services (COS) are allowed to
perform Executive Busy Override – Extension / Outside Line.
Executive Busy Override allows the user to interrupt an established
call.
Selection • COS number: 1 through 8, ( =all COS)
• Disable / Enable
Default All COS – Disable
Programming 1. Enter 505.
Display: 505 EXEC BSY OR
2. Press NEXT.
Display: COS NO?→
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • To assign all COS to one selection, press the key in step 3. In this
case, the display shows the contents programmed for COS 1.
• Program [601] “Class of Service” is used to assign a Class of Service to
each extension.
Feature References Section 3, Features
Executive Busy Override – Extension
Executive Busy Override – Outside Line