4.8 Extension Programming
Outgoing Permitted Outside Line Assignment — Day / Night
605-606
System Programming 4-125
Description Determines the outside lines which can be accessed by an extension
in both day and night modes. The extension users can make
outgoing outside calls using the assigned outside lines.
Selection • Jack number: 1 through 8, (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Outside line (CO) number: 1 through 3, ( =all outside lines)
• Enabl (enable) / Disab (disable)
Default All jacks-1/2 – all outside lines – Enable — Day / Night
Programming 1. Enter a program address (605 for day or 606 for night).
Display example: 605 CO DAY OUT
2. Press NEXT.
Display: Jack NO?→
3. Enter a jack number.
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #1-1:CO1:Enabl
4. Enter the desired outside line number, or keep pressing
or until the desired outside line is displayed.
To change the current entry, enter the new number.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
8. Repeat steps 4 through 7.
9. Press END.
To Next Page
Loading...
