4.8 Extension Programming
Outgoing Permitted Outside Line Assignment — Day / Night (contd.)
605-606
4-126 System Programming
Conditions • For an explanation of jack numbering, see “Rotation of jack
number” on page 4-7.
• To assign all jacks or all outside lines to one selection, press the key
in step 3 or 4. In these cases, the display shows the contents
programmed for Jack 1 or outside line 1.
• To assign no outside line for an extension, press CLEAR in step 4.
Feature References Section 3, Features
Outside Line Connection Assignment – Outgoing
Night Service
To Next Page
Loading...
