4.8 Extension Programming
Live Call Screening Recording Mode Assignment †
610
System Programming 4-129
†: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVS100).
Description Assigns whether to close the mailbox or keep recording the
conversation after a call is intercepted.
Selection • Jack number: 1 through 8, ( =all jacks)
• Stop Rec / Keep Rec
Default All jacks – Stop Rec (Stop recording)
Programming 1. Enter 610.
Display: 610 LCS REC.MODE
2. Press NEXT.
Display: Jack NO?→
3. Enter a jack number.
To enter jack number 1, you can also press NEXT.
Display example: #1:Stop Rec
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack number, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• To assign all jacks to one selection, press the key in step 3. In this
case, the display shows the contents programmed for jack 1.
Feature References Section 3, Features
Live Call Screening (LCS)
Voice Mail Integration for Digital Proprietary Telephones
To Next Page
Loading...
