Installation 2-29
2.4.3 Doorphone and Door Opener
Connection
One doorphone (KX-T30865) and one door opener (user-supplied)
can be installed.
The maximum cable length
The maximum length of the doorphone and door opener line cord
which connects to the system is as follows:
Diameter of the line Max. length
Doorphone 22AWG 180m (590 feet)
24AWG 113m (370 feet)
26AWG 70m (230 feet)
Door Opener 22AWG 180m (590 feet)
Installing the Doorphone
1. Loosen the screw to separate the
doorphone into two halves.
2. Install the base cover to the wall with two screws.
3. Connect the wires to the screws located in the front cover.
Connect the wires
to the pins (no.25 and 50) of
the extension connector.
(See the “Pin Number Chart”
on page 2-14.)
4. Secure both halves together and re-install the screw.
Type 1: When the doorphone plate has been
fixed to the wall.
Type 2: When you wish to install the
doorphone directly to the wall.
Note Two kinds of screws are included.
Please choose the appropriate one
depending on your wall type:
To Next Page
Loading...
