A 3 Features
3-4 Features
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[100] Flexible Numbering, Account code entry
[105] Account Codes
[508] Account Code Entry Mode
[990] System Additional Information, Fields (3), (46)
Station Programming.......................................................User Manual
Flexible Button Assignment – Account Button
Feature References Section 3, Features
Toll Restriction Override by Account Code Entry
Operation References DPT Features, Standard Telephone Features
—User Manual Account Code Entry
Alternate Calling – Ring / Voice
Description This system offers two methods of Intercom Calling – Ring-Calling
and Voice-Calling. Ring-Calling informs the called party of an
incoming call with a ring tone, while the Voice-Calling uses the
calling party’s voice. The proprietary telephone user can select ring
tone or voice calling by Station Programming. If the user selects
Voice-Calling, the calling party can talk to the user immediately
after the confirmation tone. The calling extension user can change
the called extension user’s pre-set method (ring tone or voice) by
pressing “ ” after dialing the extension number. By doing so,
Ring-Calling is switched to Voice-Calling, or vice versa, at the
called extension.
Conditions Standard telephone users receive calls with Ring-Calling only.
Programming References
Station Programming.......................................................User Manual
Intercom Alert Assignment
Feature References Section 3, Features
Handsfree Answerback
Operation References DPT Features, Standard Telephone Features
—User Manual Alternate Calling — Ring / Voice
To Next Page
Loading...
