3 Features A
Features 3-5
Answering, Direct Outside Line
Description Allows the proprietary telephone user to answer an incoming call
by simply pressing the appropriate CO button without lifting the
handset or pressing the SP-PHONE / MONITOR button.
Conditions This feature permits the user to specify the desired line to be answered
if multiple incoming lines are ringing.
Programming References
No programming required.
Feature References Section 3, Features
Outside Line Connection Assignment
Operation References DPT Features
—User Manual Answering, Direct Outside Line
Automatic Callback Busy (Camp-On)
Description Allows the caller to be informed when the called party or the
selected outside line becomes free.
Automatic Callback – Extension
If the caller answers the callback ringing, the called extension
automatically starts ringing.
Automatic Callback – Outside Line
If the caller answers the callback ringing, the line is automatically
selected to allow the user to make an outside call.
Conditions • If the callback ringing is not answered in four rings (within 10 seconds)
the callback is canceled.
• More than one extension user can set this function to one extension or
outside line at the same time.
Programming References
Section 4, System Programming
[100] Flexible Numbering, Automatic callback busy cancel
Feature References None
Operation References DPT Features, Standard Telephone Features
—User Manual Automatic Callback Busy (Camp-On)