A 3 Features
3-10 Features
Step 5. Create a Digit Modification Table. Carriers E, F and G match the
outside lines and Modification Tables as follows and have the following
Access Codes:
According to Table 6, enter the Access Codes in the respective
Modification Tables using programs [330] “ARS Modify Removed Digit”
and [331] “ARS Modify Added Number” as follows:
If Modification Table 1 is applied, the user-dialed number “9-1-234-567-
8910” is modified to “9-10333-1-234-567-8910” to access the least
expensive Carrier E.
Similarly, if Modification Table 2 is applied, it is modified to “9-10555-1-
234-567-8910” to access Carrier F.
Use the “Removed Digit” program when it is necessary to delete some
leading digits from the user-dialed number. For example, if the user
manually dials a Carrier Access Code but the carrier is not the least
expensive, modification is required. For example, to delete “10333” from
the beginning of the user-dialed number and add “10555”, enter “5” in the
“Removed Digit” program. Enter “10555” in the “Added Number”
program. When “9-10333-1-234-567-8910” is dialed,
9-10333-1-234-567-8910.
The five digits are deleted and “10555” is added.
“10555-1-234-567-8910” is sent to the outside line.
Feature References Section 3, Features
Line Access, Automatic
Operation References DPT Features, Standard Telephone Features
—User Manual Outward Dialing – Line Access, Automatic
Carrier
E
F
G
CO
1
2
3
Mod. Table
1
2
3
Access Code
1-0-333
1-0-555
1-0-666
Table 6
Remove
Add
0
10333
Example: Program [330] Digit Modification Tables
Remove
Add
0
10555
Remove
Add
0
10666
Modification Table 1
Modification Table 2 Modification Table 3
Enter the number of
digits to be deleted.
Enter the digits to be
added.
To Next Page
Loading...
