B 3 Features
3-16 Features
Busy Station Signaling (BSS)
Description When attempting to call a busy extension (ringing or having a
conversation), Busy Station Signaling allows you to signal the user
on the phone to answer your call. The called extension user hears a
Call Waiting tone and is able to answer the call.
Conditions • This feature only works if the called extension has activated Call
Waiting. If it is activated, the caller will hear ringback tone.
• If the called party has been set to activate the Off-Hook Call
Announcement (OHCA) or Whisper OHCA function, the caller can
announce the call through the speaker or the handset.
• If none of three features, Call Waiting, OHCA or Whisper OHCA is set
at the called party, the caller will hear a reorder tone.
Programming References
No programming required.
Feature References Section 3, Features
Call Waiting Whisper OHCA
Off-Hook Call Announcement
(OHCA)
Operation References DPT Features, Standard Telephone Features
—User Manual Busy Station Signaling (BSS)
To Next Page
Loading...
