3 Features C
Features 3-33
Call Hold – Intercom
Description This is used to place an intercom call on hold. The held call can be
retrieved by the user who held it or by any other extension.
Conditions • Only one intercom call can be placed on hold at each telephone at one
time (up to ten calls in the system – Call Park). With a proprietary
telephone, outside calls and one intercom call can be placed on hold at
the same time. With a standard telephone, either one outside or
intercom call can be held.
• If a call on hold is not retrieved within a specific period of time, Hold
Recall is emitted.
• Music is sent to the party on hold, if available (Music on Hold).
Programming References
Section 4, System Programming
[100] Flexible Numbering, Call hold
[200] Hold Recall Time
Feature References Section 3, Features
Call Park Music on Hold
Hold Recall
Operation References DPT Features, Standard Telephone Features
—User Manual Call Hold
To Next Page
Loading...
