Panasonic KX-TD308 - Loop-CO (L-CO) Button

Station Programming (Personal Programming) 2-13
2.2 Station Programming (Personal Programming)
Loop-CO (L-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Loop-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the Flexible CO button you wish to assign as the L-
CO button.
2. Dial .
• The display shows:
3. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Message Waiting (MESSAGE) Button (Assignment)
Allows you to assign a Flexible CO button as the Message Waiting (MESSAGE) button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible CO button you wish to assign as the
Message Waiting button.
2. Dial 3.
• The display shows:
3. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
1
2
3
AUTO DIAL
STORE
Loop-CO
1
2
3
AUTO DIAL
STORE
3
Message Waiting