Panasonic KX-TD500 - Page 223

Line
Programming Guide 223
Parameter [CLIP / COLP Number] Private
Default Blank
Value Range
Up to 16 digits consisting of 0-9, or #
Description/Function Specifies a CLIP / COLP or ANI (Automatic Number Indication)
number used for the incoming / outgoing calls via Private Network
to each ISDN extension.
Notes
• The KX-TD500 System is designed and manufactured in
accordance with the following ETS (European
Telecommunication Standard) specifications: ETS 300 122
Generic Keypad protocol for the support of
supplementary services.
• Specify the registered Central Office calling number for
correct operation of CLIP and COLP.
Reference • 2.2 ISDN Originating Features (F/G)
– Calling Line Identification Presentation (CLIP)
• 2.3 ISDN Answering Features (F/G)
– Connected Line Identification Presentation (COLP)
• 3.3 Network Service Features (F/G)
– Calling Line Identification Presentation (CLIP)
– Connected Line Identification Presentation (COLP)
• 2.7.5 Displaying Your Number on the Called Party and Calling
Party's Telephone (Calling/Connected Line Identification
Presentation [CLIP/COLP]) (U/M)
Parameter [COS No.] Primary
Default 1
Value Range 1-96
Description/Function Specifies the Primary COS (Class of Service) (1-96) to the ISDN
extension.
Reference • 1.3 System Features (F/G)
– Class of Service (COS)
– Hotel Application
• 3.1.5 Changing Service Level of Extensions (Switching COS) (U/
M)
• 3.2.6 Hotel Use Features (Hotel Application) [KX-T7536, KX-
T7235 only] (U/M)