Panasonic KX-TD500 - Page 111

(2) Starting up the system with system data programmed by Maintenance PC, or using the
saved data.
After installing the optional cards required, execute the following procedures.
[Notes]
• System programming from Maintenance PC can be done in on-line mode.
• When “OFF-LINE” LED flashes, system start-up is completed. After this, system programming from a
Maintenance PC can be done.
Off-line Mode
On-line Mode
MODE=4 or 5
SYSTEM=0
Power ON reset or Press
the RESET button
“OFF-LINE” LED flashes
Press the RESET button
MODE=0
SYSTEM=0
START
END
Download system data
2.10.2 CPU Rotary-Switch Features
Installation 2-75