Panasonic KX-TD500 - Numbering Plan

4-24 System Programming
4.2.2 Numbering Plan
Used to assign the leading digits of extension numbers, and feature numbers for system features.
Specifies the leading 1 or 2 digits of the extension
number. Any number “0 through 9” can be set.
[Notes]
• If one digit is assigned as the leading digit, 3-digit
extension numbers can be assignded.
• If two digits are assigned as the leading digits,
4-digit extension numbers can be assigned.
Parameter
Value Range
(default)
Description/Function Reference
Flexible
Numbering
(F/G)
1-2 digits
consisting of 0-9
(10)
˝
(11)
˝
(12)
˝
(13)
˝
(14)
˝
(Blank)
1st Hundred
Block Extension
2nd Hundred
Block Extension
3rd Hundred
Block Extension
4th Hundred
Block Extension
5th Hundred
Block Extension
6th Hundred
Block Extension
1
2
3
4
5
6