Panasonic KX-TD500 - Page 167

4-28 System Programming
4.2.2 Numbering Plan
Specifies the feature number for Log-in/Log-out.
Specifies the feature number for canceling Automatic
Callback Busy feature.
Specifies the feature number for setting/canceling
Walking COS feature.
Specifies the feature number for External Modem
Control.
Reserved for future expansion.
Specifies the feature number for Quick Dial features.
Reserved for future expansion.
Specifies the feature number for setting/cancelling the
DND (Do Not Disturb) feature for other extensions
[For Manager, Operator only].
Specifies the feature number for cancelling the FWD
(Call Forwarding) feature assigned on other extensions
temporarily [For Manager, Operator only].
Specifies the feature number for Trunk Route Control
[For Manager, Operator only].
Specifies the feature number for UCD Supervisor
mode.
Specifies the feature number for making a TIE line call.
Parameter
Value Range
(default)
Description/Function Reference
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
(U/M) p.
Tie Lines
(F/G)
1-4 digits
consisting of
0-9, and #
(45)
˝
(46)
˝
(47)
˝
(791)
1 - 4 digits
consisting of
0 - 9, and #
(Blank)
˝
( 74)
˝
(722)
˝
(724)
˝
(725)
˝
(77)
Login / Logout
Call Back Off
Walking COS
MODEM
Control
Reserved
Quick dial 1
.
.
.
.
.
Quick dial 8
Reserved
Remote DND
Remote FWD
Cancel
Trunk Route
Control
UCD
Supervisor Mode
Tie Line Access
58
59
60
61
62
63
.
.
.
.
.
70
71
72
73
74
75
76